To update the firmware on your system:

  • Connect the N-Com system to the PC, open the N-Com Wizard programme and select the "Advanced Features" window;
  • Download the update file you are interested in (.DFU file), save it on your PC;
  • Press the button "Install firmware update"

WARNING: In order to properly update the firmware, you need to install the communication drivers and follow the Installation Procedure

Before you download the update, read the specific information on the available firmware versions.

If you use a TOM TOM SatNav: click here to download the dedicated firmware. The use of the firmware dedicated to the Tom Tom devices does not allow the use of the N-Com App.

Bluetooth Kit3 PLUS / Bluetooth Kit3

MULTI 3

Release Notes:

  • Management of the LEDs while charging the device” problem solved.
  • Improved interaction with the N-Com Apps and fixed some malfunctions.
  • Improved interaction with Garmin Zumo 660. “GPS Conference Function” problem solved.

To find out which hardware version is installed on your system, check the ‘ADVANCED FUNCTIONS’ window of the N-Com Wizard programme, under the ‘HW Version’ item.

Bluetooth Kit3 PLUS / Bluetooth Kit3

MULTI 3

Release Notes:

  • Management of the LEDs while charging the device” problem solved.
  • Improved interaction with the N-Com Apps and fixed some malfunctions.
  • Improved interaction with Garmin Zumo 660. “GPS Conference Function” problem solved.

To find out which hardware version is installed on your system, check the ‘ADVANCED FUNCTIONS’ window of the N-Com Wizard programme, under the ‘HW Version’ item.

Release Notes:

  • Added the “UNIVERSAL INTERCOM” function for connection via Bluetooth with intercom systems of other brands.
  • Added the “VOICE PROMPT” function to receive system status vocal indications.
  • Added the “BATTERY SAVING” function, which turns off the system amplifiers when there are no active audio connections, reducing background noise at the same time.
  • Added the on/off function for the FM Radio RDS (with adjustment of signal search levels) through the N-Com Wizard programme.
    N.B.: Wizard version equal to or higher than 1.3.0 required.
  • Added DSP technology for dynamic noise reduction during intercom connection.
    N.B. :this feature can only be turned on with cards fitted with hardware version: X.X.X.d
  • Disconnection of Garmin ZUMO 660 during intercom" bug resolved.

To find out which hardware version is installed on your system, check the ‘ADVANCED FUNCTIONS’ window of the N-Com Wizard programme, under the ‘HW Version’ item.

N.B.: the new features require the latest version of the n-com wizard program.
Download the updated version in the download section.

N.B.: From the DOWNLOAD section, download the User Manual updated with the latest available Firmware version.

Release Notes:

- New music management via Bluetooth: automatic connection of A2DP Profile when the device is turned on
- "Connection of A2DP profile with Garmin ZUMO 660" bug resolved
- New card management menu: BASIC – RADIO – BIKE/BIKE (can be activated upon request).
- Four-bike intercom up to 500 metres (in open field, with no obstacles ). Bike-to-Bike call function, One-to-one communication.
N.B.: From the DOWNLOAD section, download the User Manual updated with the latest available Firmware version.

Release Notes:

- Updated management of external audio devices (via wire): the audio channel is open when the system is switched on.
- Enhanced management of automatic re-connection during Intercom Bike-to-Bike (in case of connection lost for over passing maximum distance).
- Improved volume balancing on the different menu positions.
- Solved "voice loop" bug in some particular conditions after telephone call.

>